H01N2-D Single-core high-flexibility cable.

Rated voltage: Uo/U  100/100 V

Standards: EN 50525-1, EN 50525-2-81, EN IEC 60332-1-2, EN IEC 60228.

European directives: 2014/35/UE (LVD)  - 2011/65/EC and 2015/863/EU (RoHS).

Conductor: flexible annealed plain copper class 6 up to 95 mm² and class 5 from 120 mm² upward (EN IEC 60228).

Sheath:  Black rubber type EM5. If specifically requested, and for agreed quantities, the sheath can  be supplied in other single-colours (red – orange – blu etc).

Marking: continuous marking on the sheath: « LOMBARDA H01N2-D nominal cross section IEMMEQU <HAR> production date Made in Italy ».

Minimum installation and handling temperature: - 20 °C

Maximum operating temperature: 85 °C on the conductor.

Minimum usage temperature: - 35 °C only if the cable is not subjected to shocks, vibrations, movements or other mechanical stresses.

Maximum short circuit temperature: 250 °C on the conductor (for maximum 5 seconds).

Minimum internal bending radius:
For free movement 4 times the overall diameter if less than 12 mm; 5 times if between 8 and 12 mm; 6 times if greater than 12 mm;
For repeated reeling 6 times the overall diameter if less than 20 mm; 8 times if higher than 20 mm.

Maximum tensile stress: 1,5 kg/mm² of the conductor cross section.

Current carrying capacity: see EN 50565-1 and EN 50565-2 standards.

Guide to use: Arc welding cables, for use with hand-held electrodes at 100 V.

ATTENTION: the harmonised standards, for industrial or for hobby arc welding apparatus, only allow the use of cross-linked rubber insulated cables according to the EN 50525-2-81 standards. The standards do not allow the use of PVC cables that can become dangerous as they are not able to meet relevant requirements relating to safety, including a special test for resistance to the hot particles that are commonly generated during welding.